Články

  • P. Honnerová, J. Martan, M. Honner Uncertainty determination in high-temperature spectral emissivity measurement method of coatings Applied Thermal Engineering, Vol. 124, 2017, pp. 261-270
  • Houdková Š., Pala Z., Smazalová E., Vostřák M., Česánek Z. Microstructure and sliding wear properties of HVOF sprayed, laser remelted and laser clad Stellite 6 coatings Surface & Coatings Technology 318, 2017, 129–141
  • Vostřák M., Tesař J., Houdková - Šimůnková Š., Smazalová E., Hruška M. Diagnostic of laser remelting of HVOF sprayed Stellite coatings using an infrared camera Surface & Coatings Technology 318, 2017, 360–364
  • P. Honnerová, J. Martan, Z. Veselý, M. Honner Method for emissivity measurement of semitransparent coatings at ambient temperature. Defect and Scientific Reports, Vol. 7, 2017, 1386 (14 pp)
  • Houdková - Šimůnková Š., Smazalová E. The Influence of High Temperature Exposure on the Wear of Selected HVOF Sprayed Coatings. Defect and Diffusion Forum, Vol. 368, 2016, pp.55-58
  • Houdková - Šimůnková Š., Smazalová E., Pala Z. Effect of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Co-Cr-W Coating. Journal of Thermal Spray Technology, Vol. 25, No. 3, 2016, pp. 546-557
  • Houška J.,Steidl P., Vlček J., Martan J. Thermal, mechanical and electrical properties of hard B4C, BCN, ZrBC and ZrBCN ceramics. Ceramics International, Vol. 42, No. 3, 2016, pp. 4361-4369
  • Loewenhoff T., Linke J. M., Matějíček J., Rasiński M., Vostřák M., Wirtz M. Laser re-melting of tungsten damaged by transient heat loads.Nuclear Materials and Energy, Vol. 9, No. 1, December 2016, pp. 165-170
  • Lyphout C., Sato K., Houdková - Šimůnková Š., Smazalová E., Lusvarghi L., Bolelli G., Sassatelli P. Tribological Properties of Hard Metal Coatings Sprayed by High-Velocity Air Fuel Process. Journal of Thermal Spray Technology, Vol. 25, No. 1-2, 2016, pp. 331-345
  • Švantner M., Kučera M., Smazalová E., Houdková - Šimůnková Š., Čerstvý R. Thermal effects of laser marking on microstructure and corrosion properties of stainless steel . APPLIED OPTICS Vol. 55, No. 34, 2016, pp. 35-45
  • Skála J., Švantner M., Tesař J., Franc A. Active thermography inspection of contamination of the protective glass on laser scanning heads. Applied Optics, special issue Advances in Infrared Technology and Applications, Vol. 55, No. 34, 2016, pp. D60–D66
  • Z. Veselý, M. Honner, J. Mach 3D model of laser treatment by a moving heat source with general distribution of energy in the beam Applied Optics, Vol. 55, No. 34, pp. D140-D150, 2016.
  • Moskal D., Martan J., Lang J., Švantner M., Skála J., Tesař J. Theory and verification of a method for parameter-free laser-flash diffusivity measurement of a single-side object Int. J. Heat Mass Transf., vol. 102, pp. 574–584, 2016.
  • P. Honnerová, Z. Veselý, M. Honner Experimental mathematical model as a generalization of sensitivity analysis of high temperature spectral emissivity measurement method Measurement, Vol. 90, 2016, pp. 475-482
  • M. Švantner, P. Honnerová, Z. Veselý The influence of furnace wall emissivity on steel charge heating Infrared Physics and Technology, Vol. 74, 2016, pp. 63-71
  • M. Honner, P. Honnerová, M. Kučera, J. Martan Laser scanning heating method for high-temperature spectral emissivity analyses Applied Thermal Engineering, Vol. 94, 2016, pp. 76-81
  • Veselý Z., Mach J., Honner M. 2D and 3D Unsteady Simulation of the Heat Transfer in the Sample during Heat Treatment by Moving Heat Source International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 9, No. 11, 2015, pp. 1778-1783
  • Z. Veselý, P. Honnerová, J. Martan, M. Honner Sensitivity analysis of high temperature spectral emissivity measurement method Infrared Physics & Technology, Vol. 71, 2015, pp. 217-222
  • HONNER, M., HONNEROVÁ, P. Survey of emissivity measurement by radiometric methods. Applied Optics, 2015, roč. 54, č. 4, s. 669-683. ISSN: 1559-128X
  • ŠVANTNER, M., SKÁLA, J. Uncertainties of the Evaluation of the Hole Drilling Residual Stress Measurement According to the ASTM E837 Standard. Applied Mechanics and Materials, 2015, roč. 732, č. únor 2015, s. 24-27. ISSN: 1662-7482
  • MARTAN, J. Optical layer development for thin films thermal conductivity measurement by pulsed photothermal radiometry. Review of Scientific Instruments, 2015, roč. 86, č. 1, s. \´014902-1-1\´-\´014902-9\´. ISSN: 0034-6748
  • HONNEROVÁ, P., MARTAN, J., KUČERA, M., HONNER, M., HAMEURY, J. New experimental device for hightemperature normal spectral emissivity measurements of coatings. Measurement Science and Technology, 2014, roč. 25, č. 9, s. \´095501.1\´-\´095501.9\´. ISSN: 0957-0233
  • HOUDKOVÁ - ŠIMŮNKOVÁ, Š., SMAZALOVÁ, E., VOSTŘÁK, M., SCHUBERT, J. Properties of NiCrBSi coating, as sprayed and remelted by different technologies. Surface and Coatings Technology., 2014, roč. 253, č. srpen 2014, s. 14-26. ISSN: 0257-8972
  • ŠVANTNER, M., HONNEROVÁ, P., HONNER, M. Non-contact charge temperature measurement on industrial continuous furnaces and steel charge emissivity analysis. INFRARED PHYSICS & TECHNOLOGY, 2013, roč. 61, č. November, s. 20-26. ISSN: 1350-4495
  • KUSIAK, A., MARTAN, J., BATTAGLIA, J., DANIEL, R. Using pulsed and modulated photothermal radiometry to measure the thermal conductivity of thin films. THERMOCHIMICA ACTA, 2013, roč. 556, č. 1, s. 1-5. ISSN: 0040-6031
  • MAUER, M., KALENDA, P., HONNER, M., VACÍKOVÁ, P. Composite fillers and their influence on emissivity. Physics Procedia, 2013, roč. 2013, č. 44, s. 262-269. ISSN: 1875-3892
  • HOUDKOVÁ - ŠIMŮNKOVÁ, Š., KAŠPAROVÁ, M. Experimental Study of Indentation Fracture Toughness in HVOF Sprayed Hardmetal Coatings. Engineering Fracture Mechanics, 2013, roč. 110, č. září, s. 468-476. ISSN: 0013-7944
  • ŠVANTNER, M., VACÍKOVÁ, P., HONNER, M. IR thermography heat flux measurement in fire safety applications. INFRARED PHYSICS & TECHNOLOGY, 2012, roč. 55, č. 1, s. 292-298. ISSN: 1350-4495
  • MAUER, M., KALENDA, P., HONNER, M., VACÍKOVÁ, P. Composite fillers and their influence on emissivity. Journal of Physics and Chemistry of Solids, 2012, roč. 73, č. 12, s. 1550-1555. ISSN: 0022-3697
  • HYNČÍK, L., ČECHOVÁ, H. Car impact to pedestrian - fast 2D numerical analysis. Applied and Computational Mechanics, 2011, roč. 5, č. 2, s. 151-162. ISSN: 1802-680X
  • VESELÝ, Z., HONNER, M. HPL-TE method for determination of coatings relative total emissivity. Sensitivity analysis of the influences of method parameters. World Academy of Science Engineering and Technology, 2011, roč. 7, č. 79, s. 957-962. ISSN: 2010-376X
  • TESAŘ, J., MARTAN, J., REZEK, J. On surface temperatures during high power pulsed magnetron sputtering using a hot target. Surface and Coatings Technology, 2011, roč. 206, č. 6, s. 1155-1159. ISSN: 0257-8972
  • HONNER, M., ŠROUB, J., ŠVANTNER, M., VOLDŘICH, J. Frictionally excited thermoelastic instability and the suppression of its exponential rise in disc brakes. Journal of Thermal Stresses, 2010, roč. 33, č. 5, s. 427-440. ISSN: 0149-5739
  • RUDAJEVOVÁ, A., ŠROUB, J., LANG, V. Influence of Heat Transfer on Determination of Transient Temperatures for Ni53.6Mn27.1Ga19.3 Shape Memory Alloy from Dilatometric Data. International Journal of Thermophysics, 2009, roč. 30, č. 3, s. 969-975. ISSN: 0195-928X
  • ŠVANTNER, M., KLEPÁČEK, J., LANG, V. Static and modal analysis of the brake stand. Applied and Computational Mechanics, 2009, roč. 3, č. 1, s. 213-220. ISSN: 1802-680X
  • DUCHAŇ, M., HONNER, M. Tepelné zpracování laserem s využitím robota. Strojárstvo/Strojírenství/Mechanical Engineering Journal, 2009, roč. 13, č. 7-8, s. 37-38.
  • MARTAN, J., SEMMAR, N., CIBULKA, O. Precise nanosecond time resolved infrared radiometry measurements of laser induced silicon phase change and melting front propagation. Journal of Applied Physics, 2008, roč. 103, č. 8, s. 084909-1-084909-3. ISSN: 0021-8979
  • ŠROUB, J., HONNER, M., ŠVANTNER, M. Numerical models for evaluation thermal conductivity of coatings. Applied and Computational Mechanics, 2008, roč. 2008, č. 2, s. 389-396. ISSN: 1802-680X
  • LITOŠ, P., HONNER, M., LANG, V., BARTÍK, J., HYNEK, M. A measuring system for experimental research on the thermomechanical coupling of disc brakes. Journal of Automobile Engineering, 2008, roč. 2008, č. 7, s. 1247-1257. ISSN: 0954-4070
  • MARTAN, J., HERVÉ, O., LANG, V. Two-detector measurement system of pulse photothermal radiometry for the investigation of the thermal properties of thin films. Journal of Applied Physics, 2007, roč. 102, č. 6, s. 064903-1-064903-6. ISSN: 0021-8979
  • MARTAN, J., KUNEŠ, J., SEMMAR, N. Experimental mathematical model of nanosecond laser interaction with material. Applied Surface Science, 2007, roč. 253, č. 7, s. 3525-3532. ISSN: 0169-4332
  • HONNER, M., ŠVANTNER, M. Thermal box-barrier for a direct measurement in high temperature environment. Applied Thermal Engineering, 2007, roč. 27, č. 2-3, s. 560-567. ISSN: 1359-4311
  • SKOPEČEK, T., HOFMANN, P., ŠVANTNER, M. Zbytková pnutí při vysokorychlostním frézování. MM Průmyslové spektrum, 2007, roč. 5, č. 5, s. 28-29. ISSN: 1212-2572
  • MARTAN, J., CIBULKA, O., SEMMAR, N. Nanosecond pulse laser melting investigation by IR radiometry and reflection-based methods. Applied Surface Science, 2006, roč. 253, č. 3, s. 1170-1177. ISSN: 0169-4332
  • THOMANN, A., SEMMAR, N., DUSSART, R., MATHIAS, J., LANG, V. Diagnostic system for plasma/surface energy transfer characterization. Review of Scientific Instruments, 2006, roč. 2006, č. 033501, s. 033501-1-033501-6. ISSN: 0034-6748
  • RUDAJEVOVÁ, A., ŠVANTNER, M., VASYLYEV, D., MUSIL, O., LANG, V. Influence of radiation losses on thermal conductivity determination at low temperatures. International Journal of Thermophysics, 2006, roč. 27, č. 4, s. 1241-1249. ISSN: 0195-928X
  • ŠVANTNER, M. Numerical support for residual stress measurement by the hole drilling method. Journal of Computational and Applied Mechanics, 2005, roč. 6, č. 1, s. 129-143. ISSN: 1586-2070
  • MATOUŠ, L., SKOPEČEK, T., ŠVANTNER, M., HOFMANN, P. Vliv podmínek obrábění na drsnost a zbytková napětí v obrobeném povrchu při vysokorychlostním frézování (HSM) nástrojových ocelí = Influence of cutting conditions on roughness and residual stresses after high-speed milling of tool steel. Výrobné inžinierstvo = Manufacturing engineering, 2005, roč. 4, č. 1, s. 12-17. ISSN: 1335-7972
  • LITOŠ, P., ŠVANTNER, M., HONNER, M. Simulation of strain gauge thermal effect during residual stress hole drilling measurement. Journal of Strain Analysis for Engineering Design, 2005, roč. 40, č. 7, s. 611-619. ISSN: 0309-3247
  • HONNER, M., VESELÝ, Z., ŠVANTNER, M. Exodus stochastic method application in the continuous reheating furnace control system. Scandinavian Journal of Metallurgy, 2004, roč. 33, č. 6, s. 328-337. ISSN: 0371-0459
  • HONNER, M., LITOŠ, P., ŠVANTNER, M. Thermography analyses of the hole-drilling residual stress measuring technique. Infrared Physics & Technology, 2004, roč. 45, s. 131-142. ISSN: 1350-4495
  • HONNER, M., VESELÝ, Z., ŠVANTNER, M. Temperature and heat transfer measurement in continuous reheating furnaces. Scandinavian Journal of Metallurgy, 2003, roč. 32, č. 5, s. 225-232. ISSN: 0371-0459
  • HONNER, M., KUNEŠ, J. Microscale nonequilibrium heating of materials in advanced physical technologies. Engineering Mechanics, 2002, roč. 9, č. 5, s. 297-308. ISSN: 1210-2717